BRIGi Foam Structural Adhesive 600ml

BRIGi Foam Structural Adhesive

Tension Free Structural Adhesion

High performance, neutral, single component adhesive / sealant which remains permanently flexible after curing. Provides a strong bond to numerous surfaces including limestone, sandstone, concrete, aerated concrete, vertical coring bricks, polystyrene and timber.  It will bond to moist surfaces, however the strongest post cure bond is achieved on dry surfaces. Porous surfaces with a high water content such as aerated concrete should be prepared with primer if necessary. Curing takes place by polymerisation through air humidity at room temperature, curing outside to inside. The standard a curing speed is 2mm to 3mm / 24hr, however this will be slower at lower temperatures / low humidity.

Format: 600ml Foil Sausage

Colour: White

Yield (Triangular Nozzle) 6/6mm: 20 Metres

Yield (Triangular Nozzle) 8/8mm: 14 Metres

BRIGi Foam structural Adhesive Features

• High Initial Bond
• Usually primerless adhesion to almost all (even moist) surfaces
• Permanently flexible after curing
• Compensates unevenness & material tensions
• Permanent sealing / bonding to wall material
• Waterproof
• Blister free curing even at high temperatures
• Can be painted over as per DIN 52452-A1
• Resistant to weathering & UV
• Colourfast
• Non-corrosive, free of silicone, solvents, halogens, acids & isocyanate
• Bonds to limestone, sandstone, concrete, aerated concrete, vertical coring bricks, polystyrene and timber