Security Glazing Tape

• Material: Closed Cell High Performance PVC Security Glazing Tape
• Adhesive: Double Sided UV Resistant Acrylic Adhesive for Permanent Fixing
• Colours Available: Black
• Service Temperature: -40°C to 70°C (Application Temperature 10°C to 40°C)

Security Glazing Tape - Professional Grade

• Tested to BS7412 clause 8 with window systems
• High Performance Tape

This is a medium hard and resilient double‐sided, closed cell, PVC foam bonding tape. An acrylic pressure sensitive adhesive is coated on both sides, and the product has a white paper release liner. The material can be supplied with a film liner (BH) facilitating automatic application.

Prevent the Unexpected Removal of Glass from Externally Glazed Units with Affixit Security Glazing Tape.

• Bonds to Timber, Glass & Plastics
• Provides Protection from Draughts
• Provides a Water Seal (when compressed by 30%)
• U.V. Resistant
• High Performance, Fully Approved Foam Tape.

BS 7412 specifies requirements for the design, fabrication and performance of windows and glazed doorsets made from PVC-U extruded hollow profiles. It applies to windows and doorsets manufactured from PVC-U hollow profiles incorporating fusion welded corner joints.

BS 7412 applies to windows and doors fabricated into frames in a factory, to be installed vertically (within 15°) into the external face of buildings, as single or multi-light units, in coupled assemblies when appropriate, of the following types:

1. Windows:

• a. Hinged: side-hung (open in or out), top-hung (open out), bottom-hung (open in), tilt and turn or turn before tilt;
• b. Projecting: side-hung (open in or open out) and top-hung (open out or reversible);
• c. Pivoted: horizontal and vertical (hung centrally or off-centre)including reversible;
• d. Sliding: horizontal and vertical; 
• e. Side-hung: fully reversible; 
• f. Fixed light;

2. Doors:

• a. Single leaf single-swing doors with or without side lights and top panels;
• b. Double leaf single-swing doors with or without side lights and top panels. It is applicable to assemblies in which any frame member is not longer than 3 m. It does not apply to curtain walls that span across horizontal structural members of floors but is applicable to windows within a curtain walling system.