Single Sided Foam Tape

Technical Data

Single Sided Foam Tape PVC Medium Density

Lynvale closed cell PVC Foam Tape is primarily a foam compression sealant. It features an acrylic pressure sensitive adhesive on one side, and the product has a paper release liner on the other non‐adhesive face.  This single sided foam tape will act as a water‐seal and air/dust seal when compressed.

Single Sided Foam Tape Applications

Thsi foam tape is most commply used in the following applications;  single sided foam tape, medium density. Rolls and gaskets

  • For anti‐slip mounting.
  • For gap filling.
  • For cushioning.
  • For preventing electrolytic corrosion.


  • Clean to use / clean edge finish.
  • Pre‐determined dimensional sealant reduces waste.
  • No known hazards associated with this product.
  • Medium hardness multi‐purpose foam seal, with similar properties to Neoprene.
  • Suitable for indoor and outdoor environments. Resistance to abrasion, corrosion and moisture.
  • Very good ultraviolet {UV} light resistance.
  • Paper release liner on the non‐adhesive face, reducing dimensional change during application.
  • Good resistance to dilute acids and alkalis.
  • Coated on one side with a high quality pressure sensitive acrylic adhesive.
  • Shelf life of 1 year from dispatch.


  • Service temperature: ‐30°C to +70°C.
  • Application temperature: +10°C to +40°C.
  • Minimum 30% compression required to effect a water seal. Accreditation:
  • Conforms to European Directive 2000/53 EC (lead, chromium VI, mercury, cadmium free).
  • Fire rated to DIN 4102 part 1, B2. AbP DIN EN 13501‐1:2010 Class E.



  • Technical Properties
  • 10 Minute180° Peel Adhesion: 5 N/25mm
  • Compression Deflection After 1 Minute: 2.7 Ncm‐²
  • Elongation at Break: >155 % 
  • Foam Density: 130 (12 & 15mm Thick 150) Kg/m³ 
  • Force To Compress: By 30 % 3.2 Ncm‐² 
  • Shore Hardness: {OO} Scale 35 “00” 
  • Tensile Strength: 30 Ncm‐² 
  • Thermal Conductivity (k) 0.052 Wm‐¹ K‐¹ Lee’s Disc

STANDARD PRESENTATIONS Core: 76mm plastic Formats: Logs, Rolls, Die Cuts, Spools Thickness : 1.5; 3.0; 4.5; 6.0; 7.5; 9.0; 10.5; 12.0; 15.0 mm