Masking Tape Tips

#1 Choose the right tape for the job
Masking tape comes in varying degrees of adhesion, the less the adhesive strength of the masking tape the longer it can be left on a surface or used on more sensitive surfaces.

#2 Clean the surface to be taped
All surfaces should be clean and free of dust or dirt before placing any tape on them. For best results we recommend using these surface preparation wipes

#3 Use masking tape as a guide
When painting with a brush, apply the first stroke a few inches from the tape to unload the brush. Once you’ve spread some paint on the wall away from the tape use the tape line as a guide. Brush in-line with the tape instead of brushing directly onto the tape to reduce the likelihood of paint seeping under the tape.

#4  For the perfect line use Decorators Caulk
To create a perfect, crisp line between 2 colors, first lay down a line of blue painter’s tape, and then wipe latex caulk over the edge where the two colors will meet. Next apply a coat of paint slightly onto the tape where the caulking was applied. Finally, remove the masking tape before the paint dries to reveal a flawless straight line.

#5 Remove tape at a moderate speed
Keep a 90 degree pulling angle and don’t pull too slowly when removing masking tape. Pulling slowly can leave behind adhesive residue. Masking tape pulled too quickly has a tendency to tear.